Lockouts · Mississauga
Break-In Damage Lock Repair
The patio slider is sitting crooked on its track. Its latch is snapped, the frame is bowed where it was pried, and the panel no longer meets the jamb, so the house cannot be closed up for the night.
Break-In Damage Lock Repair
In plain words
When a home is broken into, the locks are not the only thing that has changed hands. Keys hanging in the hall, a spare in a drawer, a garage remote on a visor or a house key on a stolen car's ring may all be gone. Part of break-in damage repair is closing that door too. Every cylinder those keys fit is rekeyed or replaced and fresh keys are cut, the mailbox and padlocks are considered, and you are reminded to reset the garage opener and any alarm codes that were written down. The forced door gets fixed, and the missing keys stop mattering at the same time.
How the visit goesThe back door looks closed until you touch it. The edge is crushed where a bar went in, the latch is bent sideways, and the door swings free with a gentle push no matter how you turn the key.
Mississauga
How the visit goes
Which keys and codes are gone
Break-ins change who holds the keys, so the assessment includes a short inventory. Were house keys hanging by the door, in a drawer or on a hook in the garage? Was a car taken with a garage remote and a house key on its ring? Was a bag or wallet with keys inside stolen? Are alarm codes or safe combinations written anywhere that was disturbed? Each yes adds a cylinder to be rekeyed, a remote to be erased from the opener or a code to reset. The locksmith lists every lock those keys fit, including the mailbox, padlocks and a rental unit's suite door, so nothing that opened yesterday still opens tomorrow.
Rebuilding the strike side
The strike is where most forced doors failed, so it is rebuilt rather than reattached. The old plate comes off and the bolt pocket is cut to full depth, since a pocket that is too shallow stops the bolt from extending completely and leaves it easier to push back. A security strike with a boxed pocket is set flush into the jamb, its long screws driven through the jamb and shim space into the wall stud, with the longest screws placed nearest the door stop where the bolt bears. Pilot holes are drilled first so the screws seat without splitting the repaired wood. The bolt now pushes against framing lumber instead of two short screws in soft trim.
New keys and a clean slate
If keys were taken, you now hold a set that fits locks nobody else can open. The cylinders were pinned to a fresh combination and the new keys were cut from that pinning, tested in each door and counted into your hand. It is worth deciding on the spot who gets one and where the spare lives, which is no longer a hook by the door. Garage remotes have been erased and re-paired, and you have been reminded to change alarm codes and any code written on paper that was disturbed. The stolen ring is now a handful of metal that turns nothing.
Break-In Damage Lock Repair
In the van
- Replacement cylinder or core
- Hinge reinforcement plate
- Security strike box
- Wrap-around door edge reinforcer
- Rekeying pins and key blanks
What affects the quote
Same fees day, night or weekend
1Work referred to another trade
A shattered frame, a broken door slab or smashed glass is listed as needing a carpenter, door installer or glazier, and that work is quoted by those trades rather than by the locksmith.
2Matching finish and style
Choosing hardware that matches the existing trim, finish and handle style on your other doors can mean ordering rather than fitting from stock, which the quote notes.
3Lock failure or frame failure
Replacing a lock is hardware and fitting time. Rebuilding a strike side with a boxed strike, epoxy and long screws into the stud is carpentry as well, and is quoted as its own line.
Break-In Damage Lock Repair: questions
Why did the frame break instead of the lock?
Because that is where the weak point was. A standard strike plate is held by two short screws in a soft wood jamb, and the deadbolt only reaches into a shallow pocket behind it. A kick delivers the full weight of a body to those screws, and the wood around them splits along the grain. The bolt itself is rarely the failure. That is why the repair concentrates on the strike side: a boxed strike, a full-depth pocket and long screws into the stud.
They did not get in. Does the door still need attention?
It does, because the force went somewhere. A lock that held against a kick or a bar often leaves a bent strike plate, loosened screws, a gouged door edge and a bolt that now binds where it met the strike under load. Each of those makes the next attempt easier. The visit checks every part that took strain, replaces what bent, reinforces the strike and hinges with long screws, and confirms the bolt throws cleanly, so the door is stronger than the one that was tested.
Will my door be boarded up, or can it be made to lock tonight?
Most forced doors lock again during the visit. If the slab and frame are sound, a new lockset goes in and the strike is reinforced. If the jamb is split, a repair plate or a boxed strike screwed into the stud usually holds it. Boarding is reserved for openings where the frame or the door itself is destroyed, and even then it is fitted so the household can get out from inside without a key.
Lockout Services
- Business Lockout ServiceThe manager who holds the only set of office keys is on a plane.
- Broken Key ExtractionA roommate tried to help with tweezers, then by gluing the other half to it.
- Seized & Jammed Lock OpeningThe old mortise lock on the front door of the house turns the key halfway and stops with a dull…
Break-In Damage Lock Repair near you
This is the working list of services for Mississauga: the jobs a locksmith gets asked to do week in and week out. Lockouts and broken keys. Rekeys and lock changes. Deadbolts, high-security cylinders and smart locks. Commercial hardware and master key systems. Safe opening. And key cutting, house and vehicle alike.